NEW TREX-600E

[grecofelipe]

relatos sobre este esc 80HV que vira junto...


Has established this regulator on Atom 6HV.
Has made on it only 20 flights. Yesterday the regulator has short-circuited power wires and has lit up in flight. It has led to falling from height of 10 meters.
Has thrown out - canopy, the chassis, 2 servo and accumulators.


This ESC has been working great for about 50 flights and then poof - up in flames during a normal flight.
I hope CC finds the source of the problem soon before someone gets hurt.

I used one in my logo 600 for around 30 flights. It was fine during the spring months and then the temps climbed into the 80s... Two mins into a flight and I lost power and control. Grass was long so damage was minimal. When I removed the canopy, the battery and motor wires were hanging loose and the only thing left of the ESC was a burned piece of shrinkwrap. Not worth returning since I would rather buy a Jive.

[Rcaquinoyak]

http://helidirect.com/align-trex-600e-pro-flybar-super-combo-p-23725.hdx
Chegada estimada para o dia 24 de maio (=(=(=(=
Alguem sabe quais as baterias ideais para 3d com esse modelo ??
Obrigado

[Paulinho]

[quote:3776ea6141="Rcaquinoyak"]http://helidirect.com/align-trex-600e-pro-flybar-super-combo-p-23725.hdx
Chegada estimada para o dia 24 de maio (=(=(=(=
Alguem sabe quais as baterias ideais para 3d com esse modelo ??
Obrigado[/quote:3776ea6141] 2X6S de 2500mAh

[grecofelipe]

pra quem quer o kit c/ flybarless 3GX:

http://www.readyheli.com/KX016017-T-Rex-600E-PRO-Kit-Combo--Flybarless-Version_p_38375.html

[Rcaquinoyak]

[quote:ff949b0a99="PAULINHO"][quote:ff949b0a99="Rcaquinoyak"]http://helidirect.com/align-trex-600e-pro-flybar-super-combo-p-23725.hdx
Chegada estimada para o dia 24 de maio (=(=(=(=
Alguem sabe quais as baterias ideais para 3d com esse modelo ??
Obrigado[/quote:ff949b0a99] 2X6S de 2500mAh[/quote:ff949b0a99]
Só 2500 sera ?? Eu achei que fosse ser 12S 3000 ou 3300... Pelo menos é mais barato rsrsrs.
Obrigado

[grecofelipe]

[quote:bddb1232c1="Rcaquinoyak"]http://helidirect.com/align-trex-600e-pro-flybar-super-combo-p-23725.hdx
Chegada estimada para o dia 24 de maio (=(=(=(=
Alguem sabe quais as baterias ideais para 3d com esse modelo ??
Obrigado[/quote:bddb1232c1]

ta no video do alan szabo time: 4:24 bateria 12S 3200mAh
http://www.youtube.com/watch?v=DU8o3djhvSU&feature=youtube_gdata_player

[Paulinho]

[quote:afb28be24a="grecofelipe"][quote:afb28be24a="Rcaquinoyak"]http://helidirect.com/align-trex-600e-pro-flybar-super-combo-p-23725.hdx
Chegada estimada para o dia 24 de maio (=(=(=(=
Alguem sabe quais as baterias ideais para 3d com esse modelo ??
Obrigado[/quote:afb28be24a]

ta no video do alan szabo time: 4:24 bateria 12S 3200mAh
http://www.youtube.com/watch?v=DU8o3djhvSU&feature=youtube_gdata_player[/quote:afb28be24a] Hummm! Baterias novas da Align, quais seriam as dimensões delas e peso? No meu HV uso 2X6S Turnigy nano-tech 2650mah e dá para 6min de vôo.

[grecofelipe]

da align eu n achei, mas a da voltz 6S 3300mAh 35C:
- Size: 135mm(L) 46mm(W) 38.5mm(H)
- Weight: 499g


http://www.readyheli.com/VT330035C6S-Voltz-3300mAh-6S-222V-35C-Lipo-Pack_p_37223.html

paulinho a sua bateria eh 35C?! ta aguentando na boa?!

[Paulinho]

[quote:810eaa9e91="grecofelipe"]da align eu n achei, mas a da voltz 6S 3300mAh 35C:
- Size: 135mm(L) 46mm(W) 38.5mm(H)
- Weight: 499g


http://www.readyheli.com/VT330035C6S-Voltz-3300mAh-6S-222V-35C-Lipo-Pack_p_37223.html

paulinho a sua bateria eh 35C?! ta aguentando na boa?![/quote:810eaa9e91] As que uso é de 50C, tudo frio depois de 6min e motor com +-70°, 3D leve.
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11917

[Rodrigo Morales]

[quote:c55f193390="PAULINHO"][quote:c55f193390="grecofelipe"]da align eu n achei, mas a da voltz 6S 3300mAh 35C:
- Size: 135mm(L) 46mm(W) 38.5mm(H)
- Weight: 499g


http://www.readyheli.com/VT330035C6S-Voltz-3300mAh-6S-222V-35C-Lipo-Pack_p_37223.html

paulinho a sua bateria eh 35C?! ta aguentando na boa?![/quote:c55f193390] As que uso é de 50C, tudo frio depois de 6min e motor com +-70°, 3D leve.
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11917[/quote:c55f193390]

Não é essa não filhote...

Você usa essa aqui:

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11948

A não ser que tenha comprado outras.

São de 35C, com 70 de pico.

Abraço