Nova versão 5 disponível do Simulador Phoenix, 2014 !
-
- Equipe E-voo.com
- Mensagens: 949
- Registrado em: Seg Nov 26, 2007 3:08 pm
- Localização: Rio de Janeiro
- Contato:
Tenho do Futaba 12 acredito que os procedimentos sejam os mesmos
Hi Andre
The instructions for setting this transmitter up for use with an R/C simulator is as follows:
- Make sure that your transmitter is set to output only 8 channels through the trainer port
- Set the trainer settings to STUDENT
- Set the ACT option to “ON” (NOT INH)
- Make sure that when you connect the Phoenix USB interface to the training port that your transmitter is switched off – it should then turn on automatically.
Best Regards
Phoenix Support
Hi Andre
The instructions for setting this transmitter up for use with an R/C simulator is as follows:
- Make sure that your transmitter is set to output only 8 channels through the trainer port
- Set the trainer settings to STUDENT
- Set the ACT option to “ON” (NOT INH)
- Make sure that when you connect the Phoenix USB interface to the training port that your transmitter is switched off – it should then turn on automatically.
Best Regards
Phoenix Support
-
- membro
- Mensagens: 2
- Registrado em: Ter Ago 10, 2010 5:58 pm
- Localização: Jaboti - Pr
- Lívio Cardoso
- membro
- Mensagens: 3452
- Registrado em: Ter Jul 27, 2010 9:18 am
- Localização: Uberlândia - MG
- Contato:
- Flavio LHP
- membro
- Mensagens: 1658
- Registrado em: Sex Jan 20, 2012 1:17 pm
- Localização: São Paulo, SP
E ae galera.. to com um pequeno problema com meu Phoenix4.0.J
Quando começo a jogar online o computador perde conexao com a internet. Jogo no notebook e se na oto com o phoenix ligado o computador nao perde conexao wireless..
Alguem ja teve esse problema?
Aproveito para perguntar sobre o 3D.. se conectar o computador numa TV 3D será que dá pra ficar 3D?
Abs a todos!!
Quando começo a jogar online o computador perde conexao com a internet. Jogo no notebook e se na oto com o phoenix ligado o computador nao perde conexao wireless..
Alguem ja teve esse problema?
Aproveito para perguntar sobre o 3D.. se conectar o computador numa TV 3D será que dá pra ficar 3D?
Abs a todos!!
-
- Equipe E-voo.com
- Mensagens: 949
- Registrado em: Seg Nov 26, 2007 3:08 pm
- Localização: Rio de Janeiro
- Contato:
When attempting to join an online session, I cannot connect to the session or see all pilotsTop
Phoenix uses a complicated system including a dedicated "master" server in order to make connecting as easy as possible, even if both the session creator and joiner are both behind routers and/or firewalls.
Despite these extra measures, some routers and firewalls will not allow this process to happen. This is partly due to the protection this gives your computer against malicious attacks from the internet.
In these cases, you may need to "open" or "forward" the internet ports on your router that Phoenix uses for online flight to your computer's own address.
The ports that Phoenix uses are UDP PORTS 26500 - 26505.
There is a great deal more information on how to accomplish this on the internet, on website such as PortForward.
If this fails to resolve the problem, you may consider changing your router to a more compatible make and model.
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Abra as portas do sem modem conforme acima, UDP 26500 - 26505
Peca uma pessoa que mexe com redes se vc não souber, pois cada modem tem seus procedimentos.
Provavelmente seja este seu problema as portas não configuradas certas.
Outra coisa seu Phoenix é Original correto ? caso não seja pode ser este o problema também , quanto a tela TV 3D eu nunca testei mas conheco quem testou a antiga versao 3.0 numa tv 3 D e disse que tinha ficado show, imagino agora a versao 4 do phoenix.
Se alguem ja testou posta ai seu comentario.
Phoenix uses a complicated system including a dedicated "master" server in order to make connecting as easy as possible, even if both the session creator and joiner are both behind routers and/or firewalls.
Despite these extra measures, some routers and firewalls will not allow this process to happen. This is partly due to the protection this gives your computer against malicious attacks from the internet.
In these cases, you may need to "open" or "forward" the internet ports on your router that Phoenix uses for online flight to your computer's own address.
The ports that Phoenix uses are UDP PORTS 26500 - 26505.
There is a great deal more information on how to accomplish this on the internet, on website such as PortForward.
If this fails to resolve the problem, you may consider changing your router to a more compatible make and model.
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Abra as portas do sem modem conforme acima, UDP 26500 - 26505
Peca uma pessoa que mexe com redes se vc não souber, pois cada modem tem seus procedimentos.
Provavelmente seja este seu problema as portas não configuradas certas.
Outra coisa seu Phoenix é Original correto ? caso não seja pode ser este o problema também , quanto a tela TV 3D eu nunca testei mas conheco quem testou a antiga versao 3.0 numa tv 3 D e disse que tinha ficado show, imagino agora a versao 4 do phoenix.
Se alguem ja testou posta ai seu comentario.
- vitor bastos
- membro
- Mensagens: 469
- Registrado em: Sáb Mai 08, 2010 7:55 pm
- Localização: São Gonçalo-RJ 20
- vitor bastos
- membro
- Mensagens: 469
- Registrado em: Sáb Mai 08, 2010 7:55 pm
- Localização: São Gonçalo-RJ 20
- Márcio Minervino
- membro
- Mensagens: 493
- Registrado em: Qui Dez 09, 2010 5:32 pm
- Localização: Itabuna -BA