Nova kk versão 2.1

[swisscopters]

Pessoal,

acabei de comprar a nova kk 2.1 da HK
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=49254
O Rolf Bakke fez esse projeto exclusivamente para a HobbyKing.
A placa ganhou novos sensores e nova MPU.

Informações:

The next evolution of the rotor revolution is here!! The KK2.1 is packing new found power with updated sensors, memory and header pins.
Designed by the Grandfather of the KK revolution, Rolf R Bakke, exclusively for HobbyKing, the KK2.1 is the evolution of the first generation KK flight control boards. The KK2.1 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed. Simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!
The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an Auto-level function. At the heart of the KK2.1 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional header has been added for voltage detection, so no need for on-board soldering. A handy Piezo buzzer is also included with the board for audio warning when activating and deactivating the board.
If you’re new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.1 was built for you. The 6 Pin USBasp AVR Programming interface ensures future software updates will be quick and easy.
Specs
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega644 PA
Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us


Vamos ver se é melhor mesmo.. agora é esperar chegar..

[msvalenteadm]

Comprei 2 pra testar, 1 pra vender rsrs

[hugoyh]

Vou esperar um review de vcs, se bem que pelo q to vendo jaja vai estar em Backorder...

Peço ou não peço.....OHH DUVIDA CRUEL...hahaha

[msvalenteadm]

[quote:72a9a6ee6e="hugoyh"]Vou esperar um review de vcs, se bem que pelo q to vendo jaja vai estar em Backorder...

Peço ou não peço.....OHH DUVIDA CRUEL...hahaha[/quote:72a9a6ee6e]

Acabou kkkk
Comprei 2 porque nao tinha mais senao tinha comprado umas 5 pra revender, uma placa muito boa a 2.0 entao a 2.1 deve ter melhorado ainda mais com o gyro novo 6050

[roger_fci]

bk ......

[swisscopters]

segundo o site, a placa vem com o firmware 1.5.. e já existe a versão 1.6 para ela.. basta atualiza-la com a última versão do kkmulticopter flash tool que já é compativel com a kk 2.1 da HK
:P

Supported boards: [b:f56a8d5902]Hobbyking KK2.1 Multi-rotor LCD Flight Control Board[/b:f56a8d5902] , Hobbyking KK2.0 Multi-rotor LCD Flight Control Board, Blackboard (DealExtrem), KK Plus V5.5d/e, Korean Blueboard and Redboard, HobbyKing Quadcopter Control Board V1, HobbyKing Quadcopter Control Board V2/V2.1, HobbyKing Multi-Rotor Control Board V3, all kk-boards with one of ATmega 48/P/PA, 88, 168/P/PA, 328P/PA.

http://lazyzero.de/en/modellbau/kkmulticopterflashtool

[msvalenteadm]

Tem que prestar atenção que existe a versão 1.6 da kk2.0 e a 1.6 da kk2.1, como mudou o gyro o versão da kk2.0 nao serve na 2.1
Eu uso a 1.6 na kk2.0 e acho muito bom

[swisscopters]

[quote:ba5723379b="roger_fci"]bk ......[/quote:ba5723379b]


heheheh só quero ver quando o carlinhos ficar sabendo que chegou atrasado pra festa.. já está tudo mesmo em backorder as kk 2.1

[tchello silveira]

Se tivessem feito ela USB aí sim seria uma evolução que valeria a pena.

[msvalenteadm]

[quote:dea1e66e97="swisscopters"][quote:dea1e66e97="roger_fci"]bk ......[/quote:dea1e66e97]


heheheh só quero ver quando o carlinhos ficar sabendo que chegou atrasado pra festa.. já está tudo mesmo em backorder as kk 2.1[/quote:dea1e66e97]

Vendo uma pro carlinhos kkkkkk