Novos esc`s especiais para multirotores inclusive com conectores para serem usados em um cabo adaptador para eles.
[URL=http://imageshack.us/photo/my-images/11/253651.jpg/][img:40f22d4363]http://imageshack.us/a/img11/1250/253651.jpg[/img:40f22d4363][/URL]
Introducing the brand new range of Turnigy Multistar ESC's!
These brushless speed controllers are primarily intended for use in Multi-rotor aircraft and are the key element to our new Modular Multi-rotor power systems.
This series of ESC's features a very smooth, linear throttle response, without sacrificing a rapid, crisp, response to any throttle input. Safety is not forgotten with all Multistar Esc's featuring adjustable battery LVC, stalled motor (overload) protection, signal loss shut-down and safe arming.
All Multistar series ESC's come pre-terminated with bullet connectors suited to the ESC's rated power handling. This allows for plug and play convenience by simply adding the appropriate battery supply splitter (3,4 or 6 ESC) and motor lead extensions from the Multistar modular accessory line. What could be simpler?
Multistar ESC's can utilise the Multistar programming card. All Multistar ESC's feature an ATmega MCU that opens the door to customisable firmware - for those so inclined!
This 30 amp ESC is amongst our new modular Multi-rotor plug and play power system range, in total there are 5 ESC's, ranging from 10 – 45 amps.
Please refer to the related items below for a solder free multi-rotor power solution to suit your next multi-rotor project.
Details:
• Smooth and linear throttle control
• Fast response to throttle input
• Low-voltage cut-off
• Stalled motor protection
• Throttle signal lose protection
• Safe power-on (throttle lockout)
• Support 480Hz+ high refresh rates (up to 499hz)
• Compatible with programming card
Diversas amperagens.
10 AMP
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25362&aff=171252
15 AMP
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25363&aff=171252
20 AMP
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25364&aff=171252
30 AMP
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25365&aff=171252
45 AMP
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25366&aff=171252
Outra item que vai ajudar bastante sao os cabos prontos para conectar os esc`s ai nao precisa fica comprando cabo e conector separado sem fala em fica soldando tudo aquilo.
[URL=http://imageshack.us/photo/my-images/593/25486.jpg/][img:40f22d4363]http://imageshack.us/a/img593/5797/25486.jpg[/img:40f22d4363][/URL]
Para Hexa
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25486&aff=171252
Para Quad
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25480&aff=171252
Novos Esc`s Turnigy para Multirotores.
Só não entendo porque eles insistem em colocar BEC se no final das contas vamos ter que eliminar eles do ESC!!! e o pior é que justamente por isso já não tem condições de serem OPTOS o que faz uma grande diferença nas correntes de looping.
Sem contar que se não tivesse a porcaria do BEC, seriam MENORES, mais LEVES e mais BARATOS.
Sem contar que se não tivesse a porcaria do BEC, seriam MENORES, mais LEVES e mais BARATOS.
-
Raphael Oliveira
- membro
- Mensagens: 127
- Registrado em: Ter Abr 24, 2012 3:25 pm
- Localização: São Paulo
-
Vinicius Fantini
- membro
- Mensagens: 2604
- Registrado em: Qui Fev 15, 2007 10:08 pm
- Localização: São Paulo - SP
