Isso voa???

[Eddie733]

Pessoal,

Sou iniciante em multimotores (mais um) e estou lendo tudo que posso para montar meu primeiro quad. Nãao vou esconder que a dificuldade é muita. Minha experiencia com rc data de muito tempo atrás, quando montava veleiros (ripa por ripa) e saía para velejar meus modelos.

Estou chegando a seguinte configuração e, as opiniões, piadas e conselhos serão bem vindas, tudo no intuito de melhorar o aprendizado. Voa ou não voa???

Frame:
[img:1735899dc5]http://www.goodluckbuy.com/images/detailed_images/sku_83170_2.jpg[/img:1735899dc5]

ATG 600-X4-12 Quadcopter Fiber Glass Multicopter Folding Frame with Tall Landing Skid
Descriptions:
- This is a ATG L600 X4 Fiber glass Folding Frame Quadcopter Multicopter With Tall landing skid
- Adopts high strength fiber glass material thus ensure high impact resistane
- 600mm wheelbase
Specifications:
- De luxe glass fiber
- Wheel base :600MM
- Frame weight:275 grams
- With Tall landing skid(190mm tall)

Motor:
[img:1735899dc5]http://www.goodluckbuy.com/images/detailed_images/sku_80176_2.jpg[/img:1735899dc5]

DJI Brushless Motor for DJI F330 F450 F550 Multicopter Quadcopter

Specifications:
- Type : 22*12mm
- KV:920 rpm/V
- Voltage:DC 7-12V
- Weight:53g

Hélices;
[img:1735899dc5]http://www.goodluckbuy.com/images/detailed_images/sku_90530_2.jpg[/img:1735899dc5]

ATG 10x4.7" 10X4.7P 1047R CW CCW Propeller for Multi-rotor Copter QuadCopter Static/dynamic Balance
Specifications:
- Static/dynamic balance
- super impact resistance
- Size:10x 4.7''
- Diameter of Shaft: 6.0mm
- Color:Black+Orange
- weight:17.6g /pair
- Adjustable by hole adapter (3MM-5MM-6MM)
- Recommended wheelbase: 550-700mm
- Recommended motor: 650KV - 1150KV

Esc:
[img:1735899dc5]http://www.goodluckbuy.com/images/detailed_images/sku_78834_0.jpg[/img:1735899dc5]

4PCS HobbyWing Pentium 40A Brushless Speed Controller ESC Built in BEC 5V/3A
Description:
- Output: Continuous 40A, Burst 60A up to 10 Secs.
- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: 3A / 5V (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
- (BLM: BrushLess Motor)
- Size: 55mm (L) * 28mm (W) * 12mm (H).
- Weight: 35g.
Features
- Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
- Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
Programmable Items:
- Brake Setting: brake enabled / brake disabled.
- Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
- Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
- Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
- Start Mode: normal / soft / very soft.
- Timing: low / medium / high.
- Reset: reset all the programmable items to its default setting.
- Full Protection Features: Low voltage cutoff protection / over-heat protection / throttle signal lost protection.
Advantages
- Military standard capacitor with extreme low resistance is used at voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
- Extreme low resistance PCB is used at power output section to get best current endurance capability.
- Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
- Compatible with Hobbywing's Program Card.
- Intellectual property rights of our own


Bateria:
[img:1735899dc5]http://www.goodluckbuy.com/images/detailed_images/sku_83397_1.jpg[/img:1735899dc5]

Ace 11.1V 4000mAh 30C LiPo Battery Pack


Specifications:
- Capacity: 4000mAh
- Continuous discharge rate: 30C
- Burst rate: 30 C
- Voltage: 11.1V
- Brand: ACE
- Size:135mmx41mmx27mm
- Weight: 329g

Cover:
[img:1735899dc5]http://www.goodluckbuy.com/images/detailed_images/sku_88025_1.jpg[/img:1735899dc5]

ABS Black Cover for ATG/Xaircraft Quadcopter Hexcopter (Dual12mm Size Arm)
Description:
- Model: Quadcopter Cover
- Material:ABS
- Quantity:1pcs
- Weight:70g
- Inner size:160MM
- suitable for ATG/XA series Quadcopter and Hexcopter,this listing if for Dual 12mm diameter arm

Esc Set up:
[img:1735899dc5]http://www.goodluckbuy.com/images/detailed_images/sku_30169_2.jpg[/img:1735899dc5]

Placa Controladora:
[img:1735899dc5]http://www.hobbyking.com/hobbyking/store/catalog/24723.jpg[/img:1735899dc5]

Tx/Rx
[img:1735899dc5]http://www.hobbyking.com/hobbyking/store/catalog/Mready-01.jpg[/img:1735899dc5]


Essa é uma configuração. Escolhí a GLB pois não cobra frete e foi bem indicada aqui no forum.
Outra configuração é do H.A.L, da HK. Semana que vem eu posto.

Obrigadão.

[birajones]

Voa tranquilo! Mas, tenta pesquisar um pouco mais por motores e escs substitutos. Acho que dá pra diminuir o preço. Faz uma simulação na Hobby King e em outros sites também pra ver se vale a pena comprar tudo aí na GLB.

No mais, o setup está bom. Só mudaria o ESC e colocaria um de 30A.

[Eddie733]

Pois é Bira. O negócio é que na especificação do motor está escrito: Satandard current 15-25A Max curr: 30A. Daí resolví optar por uma amperagem acima de 30 (apesar de achar que esse valor é de pico)


Eddie

[lauro rock]

[quote:902524bb88="Eddie733"]Pois é Bira. O negócio é que na especificação do motor está escrito: Satandard current 15-25A Max curr: 30A. Daí resolví optar por uma amperagem acima de 30 (apesar de achar que esse valor é de pico)


Eddie[/quote:902524bb88]

Que nada! Essa corrente é a corrente nominal máxima suportada pelas bobinas do motor, colocando uma hélice maior do que a recomendada a corrente consumida passa dos 30 amperes tranquilo.



Att