Novo spektrum dx9

Li-po, Li-Ion, Nimh, 1s2p, 10c...... quer aprender mais sobre o "combustivel" dos nossos modelos? Este é o local! Aqui também está aqueles esquema de carregador ou aquele ESC que estava procurando.
cirso
membro
Mensagens: 259
Registrado em: Qui Jun 04, 2009 9:48 am
Localização: Campo Grande

Mensagem por cirso »

Alguém está usando simulador com ele?
Avatar do usuário
G!0V@NN!
membro
Mensagens: 28
Registrado em: Ter Fev 28, 2012 2:38 pm
Localização: Rio Branco, AC

Mensagem por G!0V@NN! »

Eu uso sem problema algum no Real Flight G4.
Avatar do usuário
Redivo 2012
membro
Mensagens: 127
Registrado em: Seg Mar 26, 2012 9:26 pm
Localização: Pato Branco - Paraná

Mensagem por Redivo 2012 »

Olhem a versão BLACK do Spektrum DX9, que show.

http://www.horizonhobby.co.uk/aeroonline/e6spektrum/dx9-black-edition/dx9.html
cirso
membro
Mensagens: 259
Registrado em: Qui Jun 04, 2009 9:48 am
Localização: Campo Grande

Mensagem por cirso »

Galera, hoje atualizei ele

Vou tentar resumir os passos, faça sempre com bateria carregada o suficiente no rádio:
[b:0ecb2274dc]
Para atualizar o firmware[/b:0ecb2274dc]
1 - Faça backup dos seus modelos, a spektrum diz que não perde mas não custa
2 - faça upload do número do seu firmware para o cartão, entrando em System Settings -> gira ate a tela Serial Number, selecione a opção EXPORT e manda ver
3 - Desligue o rádio
4 - Retire o cartão e coloque-o no leitor de cartões do seu pc ou notebook
3 - Entre no site da spektrum e faça seu cadastro caso não tenha
4 - Registre o produto, nessa tela ele vai pedir o serial number, procure o arquivo xml e faça o upload
5 - termine o registro, ao lado dos dados do seu rádio selecione o link "Download updates"
6 - Procure o último SPEKTRUM™ DX9 AIRWARE™ VERSION, e ao final do texto terá um botão "update", clique nele e vai baixar o arquivo do firmware, salve-o no cartão
7 - Ejete o cartão de memória e recoloque-o no rádio desligado
8 - Ligue o rádio, o update vai começar sozinho, caso não comece vá na opção sd card em main menu e faça manualmente
Pronto

Instrução oficial:
[i:0ecb2274dc]SOFTWARE UPDATE INSTRUCTIONS:

Download the file SPMTX.SAX by clicking the "Download" button.
Save or copy the file from the PC to the SD card. Note: do not change the SPMTX.SAX filename or file will not auto load in Tx.
Power up the Tx with the SD card installed.
You should see the Spektrum logo on the main screen and a progress bar while the new software loads.
Verify the new version number in the System Settings, Serial Number screen in the lower right corner.[/i:0ecb2274dc]

[b:0ecb2274dc]Para atualizar os arquivos de áudio,
[/b:0ecb2274dc]1 - Vá em http://spektrumrc.cachefly.net/DX9audio.html
2 - Selecione o arquivo que deseja (inglês, espanhol, etc) e baixe-o no cartão
3 - Retire o cartão ejetando-o e coloque-o no rádio
4 - Ligue o rádio e entre no menu principal
5 - Vá em SD card e importe o arquivo de áudio, esse demora um pouco mais, uns 7 minutos


[b:0ecb2274dc]Outra dica: para importar modelos dos rádios DX7s e DX8 para o DX9 ou DX18:
[/b:0ecb2274dc]1 - exporte os arquivos do dx7s/dx8 para o cartão
2 - coloque o cartão no leitor de cartões
3 - entre em http://mutantdesign.co.uk/spm/
4 - Selecione o arquivo que deseja converter referente ao modelo escolhido, e selecione a opção "Remove slot index from model name"
5 - Pressione "Convert"
6 - Automaticamente será feito o download do arquivo já convertido, vá na pasta onde o arquivo foi baixado e transfira esse arquivo para seu cartão
7 - Retire o arquivo do dx7s/dx8 do cartão para evitar erro de leitura ou confusão
8 - ejete o cartão do leitor
9 - insira no rádio e ligue-o
10 - vá na opção de sd card e importe o modelo escolhido

PRONTO!

Isso é o que me lembro do procedimento que fiz há meia hora, importei meus 7 modelos, atualizei rádio tudo, em meia hora

[b:0ecb2274dc][color=red:0ecb2274dc]Por favor não me enviem MP questionando a respeito dos procedimentos, dúvidas só serão respondidas no tópico para que sirvam para outros usuários[/color:0ecb2274dc][/b:0ecb2274dc]
cirso
membro
Mensagens: 259
Registrado em: Qui Jun 04, 2009 9:48 am
Localização: Campo Grande

Mensagem por cirso »

Changelog das atualizações:

Spektrum™ DX9 AirWare™ Change Log
2014-May-21
Version 1.06
Changes since 2014-April-18
New Features & Improvements
• Added AS3X Gain monitor functions for use with AR636, AR6335, and similar
AS3X receivers. When you enable telemetry option AS3X, you are able to see
gain status in real time, and adjust it with a trimmer. Note that this function
performs the following re-configurations in your radio:
o The F-Mode switch has its outputs set to the proper values for AS3X
operation. If you are using it for other purposes, you will need to
reconfigure those features to allow AS3X to use them.
o Mix 16 (DX10t and higher) is used to control AS3X gain.
o The selected channel is reconfigured for proper control. If you change the
channel, you will need to manually re-assign the old channel to its desired
purpose.
o Enables a screen “AS3X Gains” on the Function List to configure
parameters.
o Enables the AS3X telemetry gain monitor on the telemetry screens.
o If you are using a DX6, you can tweak the gains using the roller while on
the AS3X Gains configuration screen. If you are using a higher radio, you
can adjust at any time using the desired trimmer.
Corrections
• In Heli mode, Governor Trim function now works properly.
• Fixed Servo Travel problem for second Elevator in a 4-Servo swash heli.
• Improved translations in multiple languages
• When using a trimmer in 2- or 3-position mode, trimmers were acting as Flight
Mode trims. They are now operating in Common Mode
• Trim decrement tone was being controlled by the Switch Sounds setting
• Governor Trim on Heli Trim Setup screen is now properly adjustable
• If a radio is configured as a Wireless Trainer Master, if it were used as a wired
slave it would not function. This has been corrected.
Audio System Changes
• No changes Spektrum™ DX9 AirWare™
Change Log
Version 1.05
2014-April-15
Changes from Version 1.04Beta
New Features & Improvements
• Swash setup with reversed channels no longer needs to be done on opposite
throw
• Characters can now be inserted or deleted while editing text. The insert
character looks like <+> and the delete character like >-<. Simply select this
character during the edit phase to do the desired action
• “Auto-Zoom” on mix curve edit screen shows wave at 10X magnification when it
will fit on the display properly
• Flight Mode switch can now have position values defined for each FM. Use the
Digital Switch Setup screen to access this. All switches may be redefined, but
the main application is expected to be multi-copter flight mode control.
• Flight Mode may be used as a mix input or channel input source. It will use the
values defined in the Digital Switch Setup screen as if they were analog inputs
• Added “no image” as an option for all model types, as well as enable several
trans-model type icons
• Vario graph width does not reset every power cycle
• Telemetry alarms are suspended while editing telemetry settings
• Improved reasonable options for sailplane throttle switch inputs
• Improved import/export compatibility between all radio types (not DX7s/DX8)
• Greatly improved sound file transfer reliability
• Improved ability to cancel sound transfers (you still need to power down after a
sound file transfer abort)
Corrections
• Models over 50 now bind properly
• Translation improvements for all languages
• Model image now exports
• Improved import/export for many features including combo switches, sub-FM
rates, timers, and telemetry features
• Mixes for 6-aileron wings function properly now
• Trainer status is voiced correctly now based upon settings • Gyro/Gov trims re-enabled in Heli mode
• Flight Mode Name editor was re-enabled
• Telemetry log switch operation force-enabled properly
• Removed 10% curve mixes could be limitation
• E-Ring is now properly disabled for swashes where it is not supported
• Improved warning for re-mapped channels which use switch inputs
• In certain situations, mixing Flaps to any channel would result in a mix to all
channels
Audio System Changes
• Improved support for Sky Zone and Fatshark head trackers
• Greatly improved sound file transfer reliability
• Corrected swap of vario vs. warning volume settings
Spektrum™ DX9 AirWare™
Change Log
Version 1.04 (Beta)
2014-Feb-19
Changes from Version 1.03
New Features & Improvements
• When setting the trainer mode, the settings for each channel now are set to the
default source when a new mode is selected. Always be sure to verify trainer
operation when changing settings.
• Full support for the Spektrum Vario SPM9589

Corrections
• When using wired trainer, channel 9 is now forced to the Master/Instructor radio.
When using wireless trainer, this is not the case.
• Improved translations in all languages
• PowerBox telemetry warnings now show text for the fault.
• Added blinking boxes around Acro/Sail trim settings that were missing them.
• Changing the sailplane icon does not reset servo information any more.
• User-defined warning settings would be changed during import due to an error in
the exported file. Be sure to verify Warning settings when importing a model.

Audio Changes
• GPS speed is now reported at proper value rather than 10X.
• Report GForce sensor more correctly in scaling and for negative values.
• Receiver voltage alarms are now spoken.
• Frame and Hold alarms are now spoken.

Spektrum™ DX9 AirWare™
Change Log
Version 1.03
2014-Jan-14
Changes from Version 1.02
New Features & Improvements
• The user is able to select an image for the model. From the Aircraft Type screen
select NEXT to access the feature.
• Changed default Timer settings from Voice to Tone. This will only take effect as
you create new models.
• Flow across Flight Mode editing screens is now consistent between Acro and
Sailplane and more intuitive.
Corrections
• Removed limitation on Idle Up 3 (Heli) and Flight Mode 5 (Acro) in models.
• Improved voice warning reports of telemetry items.
Audio Changes
• PowerBox status reports are now speak the correct values for capacity. They
were previous 1/100th of the correct value.
• GPS reports both Distance and Heading as separate options available on the
switches.
• Voice may report status of GPS altitude and speed when barometric sensors are
not installed. Note that they are status-only, not alarms, so you will need to use a
switch to activate the spoken status report.
Spektrum™ DX9 AirWare™
Change Log
Version 1.02
2013-12-04
Changes from Version 1.01
New Features & Improvements
• Added spoken telemetry warning reports for more devices.
• The BACK button is now enabled while downloading a sound file, allowing the
process to be aborted. Note that you will lose spoken sounds if you do this, but
most clicks and beeps will still function.
• Does not show hidden Mac files and directories in file lists
• Added ability to create mixes to channels which were moved using the Channel
Assignment feature.
Corrections
• Imported DX18 files will now operate all mixes properly
• Model warnings now import/export correctly
• Pressing CLEAR on the transmitter low voltage alarm setpoint will now select the
appropriate low voltage based on battery type
• Prevents lock-ups when using Export All when “Unusable Models” were listed
• Improved translations in several languages
• Fixed import of Flight Mode sound options
• Lock-ups during import, export and turning on to “blank screen” have been fixed.
• Import errors which corrupted the Flight Mode table have been fixed. These
could also cause lock-ups in certain situations.
• Corrected position of receiver voltage display on status screen.
• Removed limitation that could occur when manually creating models right at the
100-model point.
• Corrected export error that made the DX9 unable to import files it created
(released in 1.01A)
Audio Changes
• Added many new voice items, in particular related to multi-copters and
photo/video.
• Trainer status changes are now reported when not in Master Override mode.
• Spoken and Tone inactivity alarm reports now function properly with vibrator/ • Intermittent “Bind Failed” speech after proper binds is now corrected.
• Airspeed and current are now reported using the correct units and value.
• Reduced default volume for each category to 50% based on customer feedback.
Maximum volume can be increased by using System Settings second screen.
• Improved speech and sounds for several languages. Please download the
updated sound files from this link: http://spektrumrc.cachefly.net/DX9audio.html
• Corrected speaking of numbers for French
• PowerBox status reports are now speak the correct values
• Expired timer volume now works off configured value.
Spektrum™ DX9 AirWare™
Change Log
Version 1.01A
2013-Sept-30
Changes from Version 1.01
Corrections
• When exporting a model using version 1.01, the exported file could not be
directly imported into a DX9. This has been corrected.
Spektrum™ DX9 AirWare™
Change Log
Version 1.01
2013-Sept-24
Changes from Version 1.00
New Features & Improvements
• Added second timer
• Added detailed sound configuration screens for Binding, Timer, Trainer, and
miscellaneous sounds.
• Added LCD contrast calibration on the Raw I/O screen. If your screen contrast
after the installation is not correct, hold down CLEAR and BACK as you power up
the radio. Adjust contrast with the roller until the LCD shows a good image.
Click the roller to save the setting. The normal System Setting contrast
adjustment may still be used if you prefer.
Corrections
• Improved sound functionality for all languages
• Improved translations in all languages
• Trainer now properly engages with all switches automatically.
• Wireless Trainer now speaks properly when not on the Main Screen.
Audio Changes
• Added Dutch as a spoken language option.
• Improved speech and sounds for all languages. Please download the updated
sound files from this link: http://spektrumrc.cachefly.net/DX9audio.html
• Corrected speaking of numbers for several languages.
Responder